Discussion:
[SR-Users] CNXCC curious case
Kelvin Chua
2014-07-10 05:03:46 UTC
Permalink
I am using cnxcc_set_max_channels and set the max channels to 1
after the 1st call goes through and hangs up, the 2nd one would be blocked
even if there are no more active dialogs. could it be a dialog state issue?

Kelvin Chua
Carlos Ruiz Díaz
2014-07-10 13:26:31 UTC
Permalink
Hi Kevin,

what are the steps to reproduce this?

Also, do you have the latest update of the module? I remember fixing a
deadlock that could be the root cause of this problem.

Regards,
Carlos
Post by Kelvin Chua
I am using cnxcc_set_max_channels and set the max channels to 1
after the 1st call goes through and hangs up, the 2nd one would be blocked
even if there are no more active dialogs. could it be a dialog state issue?
Kelvin Chua
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
Kelvin Chua
2014-08-21 07:48:15 UTC
Permalink
just to close this issue,
it does not happen on 4.1.5

Kelvin Chua
Post by Carlos Ruiz Díaz
Hi Kevin,
what are the steps to reproduce this?
Also, do you have the latest update of the module? I remember fixing a
deadlock that could be the root cause of this problem.
Regards,
Carlos
Post by Kelvin Chua
I am using cnxcc_set_max_channels and set the max channels to 1
after the 1st call goes through and hangs up, the 2nd one would be blocked
even if there are no more active dialogs. could it be a dialog state
issue?
Kelvin Chua
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Carlos Ruiz Díaz
2014-08-21 13:22:03 UTC
Permalink
Thank you for the feedback Kelvin.
Post by Kelvin Chua
just to close this issue,
it does not happen on 4.1.5
Kelvin Chua
On Thu, Jul 10, 2014 at 9:26 PM, Carlos Ruiz Díaz <
Post by Carlos Ruiz Díaz
Hi Kevin,
what are the steps to reproduce this?
Also, do you have the latest update of the module? I remember fixing a
deadlock that could be the root cause of this problem.
Regards,
Carlos
Post by Kelvin Chua
I am using cnxcc_set_max_channels and set the max channels to 1
after the 1st call goes through and hangs up, the 2nd one would be
blocked
even if there are no more active dialogs. could it be a dialog state
issue?
Kelvin Chua
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
Loading...